top of page

← Back to the knowledge base

Printing and Mailing an O-1/EB-1/EB-2 NIW Petition: A Complete Guide

10 hours ago
4 min read

What to keep in mind when filling out USCIS forms



  • Forms must be signed. If you do not sign a form, it will be rejected and returned

  • If you make a mistake on a form, start a new one

  • Correction fluid must not be used. Of any kind

  • Highlighters must not be used on the form. Otherwise the scanner will not read the information correctly

  • Forms can be filled out electronically and printed. If you fill out forms by hand, USCIS recommends using a pen with black ink so that it shows up when scanned

  • Fill in everything on the form unless the form itself says to skip certain fields. If a form is incomplete, it may be rejected. If a field does not apply to you, people usually write N/A (not applicable)

  • A form may also be rejected if you used an old version. Make sure you are using the current version of the form from the USCIS website.


We hope you will not have any problems filling out the forms!


How to print the petition and forms for USCIS


USCIS states (https://www.uscis.gov/forms/filing-guidance/tips-for-filing-forms-by-mail) that the paper you print the petition on must be Letter size (215.9×279.4 mm or 8.5×11 inches). This is the standard US format. Compared with the more familiar A4, Letter is slightly shorter but slightly wider. So unfortunately you cannot trim A4 down to Letter — you need special paper in this format.


Forums often say that A4 is accepted anyway, since Letter paper may not be sold in some countries, or people may not know the difference (and it really is small). But the official USCIS requirements (https://www.uscis.gov/forms/filing-guidance/tips-for-filing-forms-by-mail) clearly state that Letter size is required. So we cannot recommend printing in any format other than Letter.


Text must be printed only on one side of the sheet: there should be as many sheets as there are pages in the petition. The same applies to all document scans and completed forms.

The paper must be white; colored paper is not allowed.


How to bind the petition?


The answer is simple — don’t.


  • Do not staple

  • Do not use paper clips

  • Do not use binder clips

  • Do not hole-punch

  • Do not bind the pages in any other way

These rules exist to speed up document scanning.


The best option is to simply put everything in a box and send the stack as is. Yes, even if the petition is large.


Some people do not follow this rule and bind the petition somehow anyway. Of course, it is not thrown away in that case, but scanning is slower because of the extra steps.


How to send the petition to USCIS correctly


  • You do not need to send original documents. They may simply not be returned or may even be destroyed (https://www.uscis.gov/forms/filing-guidance/tips-for-filing-forms-by-mail). Originals are required only if USCIS specifically requests them.

  • All copies of documents must be clearly marked as copies — at the top of each page.

  • Attached photos must be at least 10×15 cm (4×6 inches). If a photo is smaller, make a photocopy that meets these dimensions. This size limit does not, of course, apply to passport photos.

  • Documents must not be folded, otherwise they cannot be scanned properly. If you want to show an excerpt from a large-format newspaper, scan it and print it in the same format as the rest of the petition.

  • No dividers should be used. The box should contain only the paper itself. As we discussed earlier, the paper should not be bound in any way either.

  • Sticky notes must not be used either, because they will cover part of the content and delay processing.


All these rules are there so as not to delay scanning the petition and entering it into the electronic database.


How to determine which USCIS office to send the petition to


To find out which office to send the petition to, go to https://www.uscis.gov/forms/filing-guidance, since the guidance differs depending on the form.



Where to send the form depends on the state in which you plan to work in the US, as well as which forms you are sending together with the I-140.


Information on mailing Form I-129 is available here: https://www.uscis.gov/i-129-addresses


Can you file the petition online?


In addition to mail filing, USCIS is developing electronic filing through the USCIS Online Account at my.uscis.gov. USCIS notes that many forms can now be filed online, and a separate page of its website has tips specifically on e-filing. To get started, create a free account or sign in to an existing one.


Whether online filing is available depends on the specific form and petition category. For Form I-140, USCIS clarifies that if it is filed together with Form I-907 for premium processing, the whole package must be mailed — that is, only a standalone I-140 can be filed online. For Form I-129, which is used for O-1 petitions among others, online filing is not yet available for all classifications — check the current list on the USCIS “Forms Available to File Online” page.


When you file online, USCIS gives prompts right while you fill out the form to help you avoid common mistakes, and lets you pay the fee online immediately; the case status and notices appear in your account. If you still file on paper, you can usually link the case to your online account after mailing — using an access code that USCIS sends to the applicant’s address.


Sources

Related Posts

See All
Business Plan: Understanding the Basics

How to write a business plan for EB-2 NIW, EB-1A, EB-1C, O, L and E visas. Key sections: market analysis, project description, financial model. National importance, competitiveness, job creation. Comm

 
 
 

Comments


← Back to the knowledge base

bottom of page